CC-600

Overview

For washing those thick, hard to reach coils, turn to the CC-600 High Flow CoilPro Coil Cleaner. With an output water pressure of 300 or 600 PSI at 1.6 GPM, this unit delivers the cleaning force necessary to penetrate thick coil beds. When used with CoilShine, our environmentally friendly, non-fuming, expanding foam detergent, it will give you the cleanest coils possible.
The CC-600 is designed to be used on large multiple-pass coil beds. It operates on AC power. The unit can connect to a 3/4" water line for continuous operation, or can draw from either of its own 5 gallon tanks.The operator simply applies a thick layer of CoilShine, Goodway’s expanding foam detergent, using the custom foaming nozzle. Then, with the flick of a switch, the CoilPro is ready to drive the CoilShine right through the dirty coils with one of its low pressure fan nozzles, allowing the debris to quickly wash down the condensate drain. The precisely designed CoilPro provides just enough pressure and flow to get the job done, without damaging the delicate fins or overwhelming the drain pan.

Specs

Motor Power:
CC-600: 1.3 HP
Input Power:
CC-600: 12.5 amps, 115 V, 60 Hz AC
Input Water Pressure: Maximum 120 PSI
Output Water Pressure:
CC-600: 300 or 600 PSI at 1.6 GPM
Pump: Positive displacement diaphragm pump
Water Tank: 5 gallons
Soap Container: 5 gallons
Dimensions: 44" high x 26" wide x 18" deep
Weight:
CC-600: 85 lbs net dry

Features

600 PSI pump 115v 60Hz

Integrated 5 gallon water tank – Can be used
where a water connection is not available

Integrated 5 gallon chemical tank –
No need to drag along a pump sprayer

Chemical control valve –
Inject “CoilShine” at a 6:1 ratio

18" stainless steel wand –
Allows for use in tight locations

Optional flexible extension –
Clean hard to reach coils

Three custom nozzles – Matches any application